Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Effortless Loader Removal & Storage - Zero Lifting Required!
Taking your loader off shouldn't require a workout. The Little Buck Roll-Off Caster Kit turns loader removal, garage storage, and attachment swaps into a smooth, effortless, one-person job.
Built out of heavy-duty Midwest steel right here in Sycamore, IL, this kit attaches directly to your Little Buck Loader bucket and arms. Once installed, it allows you to disconnect your loader and roll it smoothly anywhere around your shop, garage, or barn, saving your back and freeing up valuable workspace when taking on mowing, tilling, or snow removal duties.
No-Lift Disconnect & Mobility: Roll your loader on and off your tractor effortlessly without muscle, strain, or alignment headaches.
Heavy-Duty Midwest Steel: Fabricated with high-strength steel support bars and smooth-rolling, high-capacity casters.
Precision Fit: Specifically engineered to clamp securely onto the bottom lip of your bucket (between the welds).
Compact Storage: Easily tuck your loader into a garage bay, stall, or shop corner when not in use.
Attach the Caster Bars: Raise your loader bucket to a comfortable working height. Connect one end of each steel bar securely onto the bottom lip of your bucket (between the welds).
Lower to the Ground: Lower the bucket until the casters make solid contact with the floor, taking the weight off the tractor’s front end.
Release Mounting Pins: Pull out the spring-loaded pins on the left and right sides to disengage the loader from the tractor mount.
Tilt & Lift Off: Use your tractor's tilt cylinder to raise the loader frame up and clear of the tractor mounts (keep an eye on hydraulic hose slack).
Lock the Arms: Attach the included steel tie to lock the bucket firmly to the loader arms, keeping the structure rigid and upright.
Depressurize & Roll Away: Turn off the tractor, release the hydraulic line pressure, disconnect your hoses, and smoothly roll the loader anywhere you need it in your shop!
Please Note: The Roll-Off Caster Kit is designed for easy removal and re-installation after your Little Buck Loader has undergone its initial standard installation on your tractor. It cannot be used for the initial unboxing or first-time loader installation.
Compatibility: Fits Little Buck Loaders (John Deere 4X5 Series, X-Series).
Included in Kit: (2) Heavy-Duty Steel Caster Support Bars, (1) Steel Arm Locking Ties.
Origin: Made in USA (Sycamore, IL) with Heavy-Duty Midwest Steel.
Watch the install video.
Effortless Loader Removal & Storage - Zero Lifting Required!
Taking your loader off shouldn't require a workout. The Little Buck Roll-Off Caster Kit turns loader removal, garage storage, and attachment swaps into a smooth, effortless, one-person job.
Built out of heavy-duty Midwest steel right here in Sycamore, IL, this kit attaches directly to your Little Buck Loader bucket and arms. Once installed, it allows you to disconnect your loader and roll it smoothly anywhere around your shop, garage, or barn, saving your back and freeing up valuable workspace when taking on mowing, tilling, or snow removal duties.
No-Lift Disconnect & Mobility: Roll your loader on and off your tractor effortlessly without muscle, strain, or alignment headaches.
Heavy-Duty Midwest Steel: Fabricated with high-strength steel support bars and smooth-rolling, high-capacity casters.
Precision Fit: Specifically engineered to clamp securely onto the bottom lip of your bucket (between the welds).
Compact Storage: Easily tuck your loader into a garage bay, stall, or shop corner when not in use.
Attach the Caster Bars: Raise your loader bucket to a comfortable working height. Connect one end of each steel bar securely onto the bottom lip of your bucket (between the welds).
Lower to the Ground: Lower the bucket until the casters make solid contact with the floor, taking the weight off the tractor’s front end.
Release Mounting Pins: Pull out the spring-loaded pins on the left and right sides to disengage the loader from the tractor mount.
Tilt & Lift Off: Use your tractor's tilt cylinder to raise the loader frame up and clear of the tractor mounts (keep an eye on hydraulic hose slack).
Lock the Arms: Attach the included steel tie to lock the bucket firmly to the loader arms, keeping the structure rigid and upright.
Depressurize & Roll Away: Turn off the tractor, release the hydraulic line pressure, disconnect your hoses, and smoothly roll the loader anywhere you need it in your shop!
Please Note: The Roll-Off Caster Kit is designed for easy removal and re-installation after your Little Buck Loader has undergone its initial standard installation on your tractor. It cannot be used for the initial unboxing or first-time loader installation.
Compatibility: Fits Little Buck Loaders (John Deere 4X5 Series, X-Series).
Included in Kit: (2) Heavy-Duty Steel Caster Support Bars, (1) Steel Arm Locking Ties.
Origin: Made in USA (Sycamore, IL) with Heavy-Duty Midwest Steel.
Watch the install video.
